Honey technological processing line with wide range of options, used for producing honey, both in large and small quantities, regardless of the quality of the initial product.
The honey production line consists of: honey homogenizer, lift feeder, dispenser/ honey filler and grid for pre-melting of honey.
Homogenizer for honey is intended for the thorough mixing and homogenization of different types of honey, which improves its user
properties and enables the certification of a whole batch of honey. Honey homogenizer consists of an atmospheric horizontal cylindrical
vessel with a special jacket for steam / water heating and a screw stirrer. The heating jacket is located over the entire cylindrical portion of the homogenizer.
Lift-feeder for loading honey from containers into a homogenizer. The lift is equipped with a hydraulic or pneumatic lifting mechanism. Made of stainless steel AISI 304. Capacity 2 containers with a capacity of
23 l. One load time of up to 90 seconds.
Dispenser - Honey filler
The dosage is based on the tensometric principle. Tensometric platform is installed (construction work on the customer’s side) in the concrete floor at the same level as the floor. Pallet with a barrel or empty barrel is stored on the platform, Honey filling is carried out using a self-priming pump. Once the desired volume is reached, it automatically shuts down.
Grid for pre-melting honey
It may optionally be installed on the homogenizer lid for pre-treatment melting of honey which is in the solid form. Heating is secured by water recirculation. Pre-melting can significantly reduce melting time and the homogenization process of honey.
Talk to our friendly sales representative about your capacity and requirements and they will help you choose the perfect honey creaming equipment for you. Consultation is free. Everything is manufactured in our factory in Slovakia, Eu.